 |
| |
|
|
| Electromagnetic Meters |
| For larges pipe sizes (3-48”), the EX100/200 Series insertion magmeters offer an economical and durable alternative to spool-type meters. With no moving parts, they can be used in most “dirty” applications, and are virtually maintenance free. They can be installed in standard saddle fittings. These meters are also available in a hot-tap configuration with an isolation valve to allow for |
|
| |
|
|
| Flow Computers |
| The FT415 and FT420 are compact indicating transmitters which can be ordered in wall, meter or panel mount configurations. They have sturdy NEMA 4X die-cast aluminum housings and are solidly potted for maximum protection. Design for external power, the FT420 can be used as a loop-powered 4-20 mA transmitter or as a straight-forward rate-total indicator. The user-set pulse output function is ideal for metering pump pacing or PLC interface. An internal battery makes the FT415 ideal for self-contained applications. Like the FT420, it has a settable pulse output for metering pumps or remote monitoring.
|
|
| |
|
|
| TX Paddlewheels |
| Foe many applications theses sturdy paddlewheels, with minimum flow of 0.3 ft/sec, are a rugged and economical approach. Five body materials and two shaft options accommodate most fluids.
|
|
| |
|
|
| In-line Electronic Turbine Flowmeters |
| The turbine rotor itself is the only moving parts on these units. Any meter can be fitted with a transmitterm, a pulser, a battery-powered indicator, or a full two-wire indicating transmitter. Sapphire and ruby bearings and zirconia ceramic shafts give long wear life and excellent low-flow performance. For service, the turbine insert can be removed without tanking the meter out of the line.
|
|
| |
|
|
|
| Mechanical Turbine Meters |
| For the application which requires a gear-driven mechanical turbine, this meter has an epoxy-coated ductile iron body for ruggedness and economy. An optional reed-switch pulser adds the ability to remote monitor or operated a controller. The WP meets AWWA Class II turbine meter accuracy standards.
|
|
| |
|
|
|
| Batch Controls |
| The FT520 is a flexible workhorse with a large backlit display which can be batch controller, regeneration controller, or flow monitor with relay alarm outputs. All three functions are in the software of each unit, and any of the configurations is software-selectable by the user at time of set-up. The rugged cast aluminum housing can be wall or panel mounted
|
|
| |
|
|
|
| Signal Transmitter |
| This inexpensive two-wire transmitter is accurate and rugged. Digital setting also makes it easy to use. The die-cast housing can be mounted directly to most of the SeaMetrics meters, or it can be ordered in a wall-mount configuration.
|
|
| |
|
|
|
| Data Logger |
| For unattended recording of flow rates, this innovative logging system replaces chart recorders with an inexpensive meter-mounted module, a PDA or laptop-based transporter, and desktop software. A PDA or laptop can be used to set up the logger, to monitor rate and total in the field, and to carry the data back to the office, where custom software displays and prints graphs or converts data to a spreadsheet. PDA and desktop software is contained on a single CD, and synchronizing automatically installs it.
|
|
| |
|
|
|
| TX Turbines |
| TX100/200 turbines share the basic design of the paddlewheel, but with a helical turbine rotor that improves performance at very low flows. Like the paddlewheel, it is suitable for clean water applications.
|
|
| |
|
|
| Records 1 to 9 of 9 |
|
|
| |
|
|
| |
|
 |
| |
| Here are some of the things we can do for you: |
 |
Design & Assembly of motor controller |
|
Repair of pump |
|
Rewinding of Motor |
|
| +read more |
|
| |
|
|
